FenuliResearch, made useful.

For packaging managers and design studios / free tool

Prepare a packaging RFQ.

Turn actual packaging examples into a supplier-ready list of specification questions.

6 sourced examples · free to use · no signup required

Read the decision guide ↗

The evidence library

Look into the details.

TOPFEEL PACK

PA125 mono-PP airless bottle

Supplier-published dimensions and material for the PA125 all-plastic airless bottle family.

Specification
Topfeelpack lists PP with a metal-free PP pump.
Capacities
30, 50, 80, 100, 120, 150 and 200 ml.
Supplier stated use
Recommended for toner, lotion, cream, essence and foundation.
Commercial terms
MOQ and current pricing were not assessed.

Consider the tradeoffs

  • Interpretation: Seven capacities support several pack-size concepts, but formula compatibility and dispense performance need testing.
  • Interpretation: Supplier describes mono-PP construction; destination recycling acceptance was not assessed.

Questions worth testing

  • Which capacity and filling-line interface is required?
  • Has the formula passed compatibility, leakage, dose and evacuation testing?
  • What document confirms the bill of materials, including pump and cap?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier specifications were not independently tested.
  • No price, MOQ, stock, lead time or export readiness was established.
  • Destination recycling acceptance was not checked.

Check the sources

UKPACK

UKA19 Mono 30 ml PP airless bottle

A 30 ml mono-material PP airless variant with a stated 1 ml output.

Specification
UKPACK lists SKU UKA19 Mono 30ML, PP, 30 ml capacity, 1 ml dosage output, 48 mm outer diameter and 85 mm height.
Options
Page lists PCR plastic availability and decoration options.
Commercial terms
MOQ and current pricing were not assessed.

Consider the tradeoffs

  • Interpretation: The stated 1 ml dose is a useful design input, but may not suit every formula or use.

Questions worth testing

  • Does the intended user need a 1 ml dose?
  • Can the bottle be filled on the intended line at the listed dimensions?
  • What PCR proportion and grade would be used in the quoted version?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier specifications were not independently tested.
  • No price, MOQ, stock, lead time or export readiness was established.
  • Supplier environmental descriptions were not independently audited.

Check the sources

UKPACK

UKA73 PP rotary refillable airless bottle

A detachable, rotating airless package with supplier-listed capacities and dimensions.

Specification
UKPACK lists UKA73 as PP, in 30 ml and 50 ml capacities, with 35.3 mm outside diameter and heights of 143.1 mm and 176.9 mm.
Dose
Supplier page states a 0.23 ml pump output.
Refill structure
Page describes a replaceable inner bottle and two replacement configurations.
Commercial terms
MOQ and current pricing were not assessed.

Consider the tradeoffs

  • Interpretation: A replaceable inner component changes replenishment and disposal steps; confirm the exact workflow with a sample.

Questions worth testing

  • Which replacement configuration is in the quote?
  • Does the inner bottle detach, rotate and reseal after repeated use?
  • Does 0.23 ml output work with the formula and directions?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier specifications were not independently tested.
  • No price, MOQ, stock, lead time, export readiness or destination recycling infrastructure was checked.

Check the sources

Aptar Beauty

Neomix 35 ml dual-chamber airless pack

A dual-chamber pack with specified bottle and cartridge volumes and outputs.

Specification
Aptar lists 35 ml total: 27 ml bottle plus 8 ml cartridge.
Dose and ratio
Aptar states a 70 microliter cartridge dose plus a 240 microliter bottle dose, in an 80/20 mixing ratio.
Regional availability
Page lists Asia, North America and Latin America.

Consider the tradeoffs

  • Interpretation: Separate chambers enable a two-formula design, but the stated ratio and dose become critical formula and user-experience checks.

Questions worth testing

  • Does the formula use the stated 80/20 ratio and outputs?
  • Can users identify and replace the cartridge correctly?
  • What country-specific supply and compliance documents apply?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier specifications were not independently tested.
  • Regional availability does not establish SKU-level export readiness or local distribution.
  • No price, MOQ, stock or lead time was established.

Check the sources

Aptar Beauty

Auriga airless bottle family

An airless family with three supplier-listed sizes and three dosage options.

Specification
Aptar lists 15, 30 and 50 ml volumes and 150, 200 and 240 microliter dosage options.
Formula range
Aptar states a broad viscosity range, including high and very high viscosities.
Regional availability
Page lists EMEA and Asia.

Consider the tradeoffs

  • Interpretation: Multiple sizes and doses give options, but the page does not map each dose to each size or prove compatibility.

Questions worth testing

  • Which size and dose pairing is quoted for the formula?
  • What pump material, overcap and decoration are in that version?
  • Has the pack passed formula-specific transport and repeatability tests?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier specifications were not independently tested.
  • No size-to-dose mapping, price, MOQ, stock, lead time or export readiness was established.
  • Regional availability is not destination-specific confirmation.

Check the sources

HCP Packaging

Jumbo Uno mascara and lip-gloss pack family

A supplier case describing mascara and lip-gloss packs with a stated overflow capacity.

Specification
HCP describes Jumbo Uno Duo mascara and lip-gloss packaging with an OFC of 19.7 ml.
Manufacturing and material
HCP says the packs are manufactured in HCP China and describes construction optimized with mono-material construction for the PP/PE recycling stream.
Options
The article says PCR materials are available and identifies separate mascara and lip-gloss applicator examples.

Consider the tradeoffs

  • Interpretation: A shared pack family can simplify a paired concept, while applicators and formula viscosities need separate tests.
  • Interpretation: Recycling is a supplier claim; local collection and sorting need destination-specific confirmation.

Questions worth testing

  • Is 19.7 ml the confirmed overflow capacity for each pack?
  • Which applicator is in the quote?
  • What PCR percentage, resin composition and local recycling evidence apply?
  • Is the quoted minimum per design, size, colour or SKU, and can a mixed run share it?
  • Does the sample mean a digital proof or a physical item, and do shipping and revision rounds cost extra?
  • Does lead time start at artwork submission, sample approval, deposit or production release?

Scope & unknowns

  • Supplier descriptions were not independently tested.
  • No price, MOQ, stock, lead time or export readiness was established.
  • Recycling claims were not verified for a destination.

Check the sources

Did this help your decision?

Have a correction or a question? Tell us what you need.

Want to go further?

$1,250 once, if we build it.

Five packaging formats and three supplier-confirmed specification, sample, MOQ and lead-time responses for one agreed brief.

This future extension is not available yet. Tell us if the scope and price would help with a real decision. No charge or commitment.